Ranger IH User Guide:

 

Quick Start Guide:

Power On/Off Device:

- Click Center button 3 times

Switch From Wattage to Temp Mode:

- Click Center Button 2 times


Adjust Wattage & Temp:

- Use Left and Right Buttons to go up and down in wattage or temp.

Reset Sesh Counter :

- Hold Up and Down button together for 3 Seconds

 

Switch from C to F:

- Hold Center and Right button at the same time for 3 seconds.

 

Activating Heat:

Place your DynaVap Vap Cap into the glass bowl area. When heat is activated, you will see the change on your digital screen.

 

USB-C Charge:  2 Hour Charge is recommended before first use. 
pass through charging is optional but not recommended.

 

 PRO TIPS:

Wattage Mode: Try 45 Watts as a starting point!

Temp Mode: Set the Temp to 400F and ignore the click. Once the Vapcap hits temp pull out immediately for aggressive hits.

Warnings:

Low Battery - Charge your device.

High Temp - Allow device to cool before using

Heating Circuit Failure - Contact Customer Support